Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories
Ranking: 8.5 out of 10
Manufacturer: Dremel
Model Number: 7700
Product Code: 080596077006
Price: $77.79 -- get the latest pricing from Amazon
Features:
- Cordless rotary tool with 50 accessories; 7.2 volts; two speeds (5,000 and 10,000 rpm)
- Ball-bearing shaft for smooth, low-vibration operation; bit changes with no wrench
- Lightweight, durable plastic housing
- Includes rotary tool, 50 accessories, 3-hour charger, case
- Lightweight 9 ounces; 2-year warranty
Buy it now at Amazon!
Description:
Ready to go on a minute's notice, this two-speed cordless tool and the 50 included bits are perfect for a wide variety of do-it-yourself jobs inside or out. Capable of doing almost anything the standard MultiPro does - except plug into an electrical outlet or accept attachments - you'll want to keep it charged up and handy at all times. p /pGet more product details from Amazon
User Reviews -- Add a new review for this Product
Extremely useful gadget
Rating: 4 out of 5
Weight: 10! out of 10
Created: Apr 4, 2008
Thanks for your feedback
I have a line powered Dremel but I most often grab for this rechargeable unit because its easier to handle without the cord. It is great for tight spots in the car. I recently upgraded the intercooler piping in my car and needed to enlarge a 2" hole to 3" diameter. I just used the cordless Dremel to make numerous radial cuts and bent the "tabs" back. I would have gone nuts trying to cut that out with a hack saw or file! I always use it at the full 15 krpm speed and don't miss a variable control at all. My friend lost his special "antitheft" key wrench for his license plate mounting bolts. I just used a cut-off wheel to make two cross cuts in the (round) bolt heads, and unscrewed it with a Phillips head screwdriver. Without a Dremel, it would have been tough. The battery life is short, but I always have an extra charged battery ready. If I'm working with it alot, I just rotate the batteries through the separate wall mounted recharger. It can also be used as a printed circuit drill or for other small precise drilling. Much easier to handle than a typical hand drill for light work.It does kick up some metal bits so use eye protection!
Very handy, but not for every application
Rating: 4 out of 5
Weight: 10! out of 10
Created: Apr 4, 2008
Thanks for your feedback
This is an incredibly useful tool, and I've found the selection of attachments which accompanies it to be quite good. I bought this to use on a boat and I've found a million things to repair I didn't know needed a Dremel tool! It cuts and grinds stainless steel bolts more easily than anything I've seen, never mind bronze, fiberglass, wood, etc.The battery, though, is what makes it both unique and frustrating. Of course being able to use the tool unfettered by a cord is great, and it does recharge reasonably quickly in about three hours. On the other hand, the motor is not as powerful as the corded variety, and the speed is not continuously variable. I haven't yet found either of these to be a problem. But you cannot get a half-hour of use out of a fully-charged battery. Fifteen minutes is more like it. This is plenty of time to practice home dentistry skills on the dog if you are so inclined, but it means that unless you have a battalion of extra batteries at $26 a pop you will not be able to grind out all the grout in your bathroom, cut more than ten ceramic tiles, or buzz off more than a few square inches of rust from your car from a single charge. If you are buying the tool for those sorts of projects you need the corded flavor.
Pretty good so far, though I haven't used it that much...
Rating: 5 out of 5
Weight: 7.2 out of 10
Created: Apr 4, 2008
Thanks for your feedback
I bought this in a bit of an emergency situation and it helped greatly. We needed a tool that could do some "hand milling", shaping, and filing of some small plastic parts to finish a mechanical engineering project for one of my classes. It worked really well on the plastic but when we tried using it to smooth some metal threaded rods, we chewed through a few files before the job was finished. I'm glad I bought this Dremel though because I'm sure I will be able to find some use for it in the future. The fact that this unit is cordless is also a huge help even though the batter only lasts about 20-30 minutes when used.
The right tool for pet grooming
Rating: 5 out of 5
Weight: 7.0 out of 10
Created: Dec 25, 2008
Thanks for your feedback
If you were frustrated with the power or endurance of the Dremel Cordless Pet Nail Grooming Rotary Tool-- (http://www.amazon.com/Dremel-761-03-Cordless-Grooming-Rotary/dp/B0000C6DZ2/ref=sr_1_2/002-2958210-2482411?ie=UTF8s=hiqid=1188235101sr=8-2),
br /
br /I've got the tool for you. This one uses a rechargeable battery and has excellent power. I've got a 100 lb. German Shepherd with huge nails and he does NOT like to get his nails trimmed. This tool did the job fast, no worries about cutting too deep with a clipper, and the battery charge lasts a long time.
br /
br /One caution is that the rotary sander will generate a fair amount of heat, so don't work one nail too long or it will get uncomfortable for the dog. It's worth the extra money for this tool and you don't have to feel bad about running through all those AA's.
br /
br /I've got the tool for you. This one uses a rechargeable battery and has excellent power. I've got a 100 lb. German Shepherd with huge nails and he does NOT like to get his nails trimmed. This tool did the job fast, no worries about cutting too deep with a clipper, and the battery charge lasts a long time.
br /
br /One caution is that the rotary sander will generate a fair amount of heat, so don't work one nail too long or it will get uncomfortable for the dog. It's worth the extra money for this tool and you don't have to feel bad about running through all those AA's.
Dog Toenail Trimmer!
Rating: 5 out of 5
Weight: 6.4 out of 10
Created: Jun 12, 2008
Thanks for your feedback
Bought it to trim the three labrador's toenails (or claws, as it's been a while...). They don't love it, but they put up with it much better than the clippers. We're trimming once a week, and no more worry about bloody toenails.
Very handy tool
Rating: 5 out of 5
Weight: 6.2 out of 10
Created: Apr 4, 2008
Thanks for your feedback
I have 3 Dremels now: a regular AC variable speed model, a cordless that runs at 5 and 10 thousand rpm, and this one. The convenience of the cordless models causes the AC model to lay on the shelf most of the time. I advise anyone purchasing a Dremel to also buy the 4486 MultiPro Chuck. If you change tools frequently the chuck is really essential, and I have no idea how I could use my 1/32nd and smaller drills with the collets available. It seems to me that much of the criticism I read in the other reviews of this product are from people expecting the Dremel to be a substitute for an electric drill-- In that regard I agree that it isn't one. However, for someone doing highly detailed miniature work, the Dremel is an essential tool, and the two cordless models are the best of the lot. I have had no trouble with the battery coming loose on either cordless model, and I am quite satisfied with how long the charge will drive the machine, and the relatively short time needed to recharge them.
Know your purpose--not for doggy toes
Rating: 3 out of 5
Weight: 5.3 out of 10
Created: Dec 25, 2008
Thanks for your feedback
I bought this tool from another company as a dog nail grinder. However, there are other Dremels better suited for this purpose. Also the product specs on Amazon are not always correct--double check first on the Dremel web site. This tool is currently spec'ed for 10K and 20K rpm. For puppy dogs slower is better as the friction is less and the nail does not get hot as quickly. Best tool would be something around 5K rpm. I think that's the slowest they sell. Some reviewers complained about the 8000-01 Lithium-Ion Cordless so maybe the 7800-02 9.6V Cordless MultiPro® is a good bet, though I have seen good reviews on the 750-02 MINIMITE® Cordless Tool however it's slow speed is 6500. BTW, specs for the 761-01 Pet Nail Grooming Kit are not online at Dremel so I can't confirm if the Amazon specs are correct, you need the owner's manual to do that. Thanks! and Good Luck!!
Useful for small jobs
Rating: 3 out of 5
Weight: 5.2 out of 10
Created: Dec 25, 2008
Thanks for your feedback
Overall a good useful tool for light duty use only. Battery life is very short and the cutting wheels are delicate. I've pretty much destroyed all my wheels and stones putting the dremel to tasks which it obviously can't handle. The case is rugged and holds lots of bits and attachments.pI plan to purchase a corded dremel for those more ambitious jobs.
Almost Flawless
Rating: 5 out of 5
Weight: 4.9 out of 10
Created: Dec 25, 2008
Thanks for your feedback
This tool is small, quiet, and easy to hold, even for a woman. It doesnt kick back when it turns on or while you're working with it. When you turn it off, it stops its own rotation immediately instead of spinning to a stop. I got it for my boyfriend for Christmas. pComes in a nice, compact black case that snaps shut, and even holds the manuals. One small complaint is that the attachments are left to float freely around the box. This can be corrected by using ziplock bags to hold them. pEasy to charge because the bottom of the tool pops off and fits into the charger, so the whole tool doesnt have to hang from your wall.pA couple of notes that would have helped me, so may help you- I thought this tool could be used as an electric screwdriver, but it can not. It spins too fast. pAlso, be aware when looking at the Dremel tools that some are corded. I almost ordered a corded one, but decided on this one because of the convenience of use. Corded ones give you more power per price. I think this is the most powerful cordless model offered by Dremel.
dremel tool
Rating: 5 out of 5
Weight: 4.2 out of 10
Created: Dec 25, 2008
Thanks for your feedback
I had owned a dremel tool for years but it is electric, meaning you have to drag the cord around your work. I found myself not using it very much because of the cord problem.
br /
br /This tool is battery powered and two speed. In addition, it is very light weight making it easy to navigate your work.
br /
br /I found my foot doctor using this product to trim down nails and remove dry and cracked heel skin with the sandpaper attachment, which is shipped with the product. I highly recommend this product.
br /
br /This tool is battery powered and two speed. In addition, it is very light weight making it easy to navigate your work.
br /
br /I found my foot doctor using this product to trim down nails and remove dry and cracked heel skin with the sandpaper attachment, which is shipped with the product. I highly recommend this product.
handy but be sure you know battery capacity
Rating: 3 out of 5
Weight: 4.0 out of 10
Created: Dec 25, 2008
Thanks for your feedback
This is a handy tool but the battery life is weak. For example, a battery on full charge will not last all the way through cutting a 2" x 4" hole in a metal downspout.
br /
br /If you decide you want this Dremel anyway, say because you value its small size, be sure to buy a spare battery.
br /
br /If you decide you want this Dremel anyway, say because you value its small size, be sure to buy a spare battery.
Unusual application?
Rating: 5 out of 5
Weight: 4.0 out of 10
Created: Jun 8, 2003
Thanks for your feedback
I'm a woman with SERIOUS calluses on her heels. All the usual home care in the world won't keep them in check, and pedicures and visits to the podiatrist are expensive. After a podiatrist used a Dremel and an X-acto knife to reduce the calluses--that's how bad they are--I tried my husband's corded Dremel myself but found it was too easy to burn myself; the outside edge of your heel is not the easiest thing to get to, and the high speed burns instantly. I bought the cordless model and found it much easier to maneuver and less likely to burn at its slower speeds. Periodic use on my heels when they're dry, with more orthodox methods on them when they're wet, keeps them from splitting, shredding stockings and looking like rhinocerous hide. Plus it's handy for its more conventional uses, although not suited to the heavier work of the corded Dremel. If I lost it I'd buy another pronto.
Excellent for our dogs nails
Rating: 5 out of 5
Weight: 4.0 out of 10
Created: Aug 5, 2008
Thanks for your feedback
We have 4 Great Danes, and 2 Shar-peis.
br /
br /I read, and reread reviews on the Dremel cordless rotary tools. After reading the reviews on the actual cordless dog grooming nail tool. I opted for this model. Due to the rechargeable lithium battery battery charger included.
br /
br /Well, It arrived today. I charged the unit for 3 hours. And in 45 minutes all the dogs nails were trimmed. No splitting, no cutting the quick. Finally a dreaded task made sooo easy. And plenty of power to spare.
br /
br /I used an attachment from my corded model. I used the barrel shaped medium grit (stone) grinder attachment. On low speed, as opposed to one of the cardboard sander's. The stone grinder worked out perfectly. Very little, to no friction. Therefore, it did not heat up the nail.
br /
br /This unit is very quiet, and does not have a high pitched annoying sound. So, very little reaction from the dogs, considering this was the first time a rotery tool has been used to trim their nails.
br /
br /If you have a dog. This is a MUST HAVE for nail trimming.
br /
br /
br /
br /
br /
br /I read, and reread reviews on the Dremel cordless rotary tools. After reading the reviews on the actual cordless dog grooming nail tool. I opted for this model. Due to the rechargeable lithium battery battery charger included.
br /
br /Well, It arrived today. I charged the unit for 3 hours. And in 45 minutes all the dogs nails were trimmed. No splitting, no cutting the quick. Finally a dreaded task made sooo easy. And plenty of power to spare.
br /
br /I used an attachment from my corded model. I used the barrel shaped medium grit (stone) grinder attachment. On low speed, as opposed to one of the cardboard sander's. The stone grinder worked out perfectly. Very little, to no friction. Therefore, it did not heat up the nail.
br /
br /This unit is very quiet, and does not have a high pitched annoying sound. So, very little reaction from the dogs, considering this was the first time a rotery tool has been used to trim their nails.
br /
br /If you have a dog. This is a MUST HAVE for nail trimming.
br /
br /
br /
br /
A Handy Grooming Tool
Rating: 5 out of 5
Weight: 4.0 out of 10
Created: Jul 28, 2008
Thanks for your feedback
I've used the Dremel 770 to maintain my dog's nails for several months now and he quickly learned to (finally) relax! I accidentally hit the quick on a nail (with dog clippers) eight years ago and he would never come when it was time to do his nails after that . . . up 'til now.
br /
br /This tool spins fast! One careless slip and you've ripped out some fur, so you need to remain TOTALLY focused and Fido needs to keep real still.
br /
br /I rotary file his nails (on low) outdoors when the wind is blowing slightly to reduce our inhaling the shavings, and it's easier to see the vein in the nail outdoors in the sunlight. I lay my pet on his back and trim any long fur between his toes first so it can't get caught. After partially covering his face I hold the unit firmly and grind with light strokes, keeping it moving, and doing a second nail intermittently so nail heat won't build up and he doesn't know what's coming next! Ha-ha!
br /
br /Once you get the hang of it, it's quick and easy to get the job done just be sure to take your time and stay focused! In capable hands, I highly recommend this product! Happy Dremeling!
br /
br /This tool spins fast! One careless slip and you've ripped out some fur, so you need to remain TOTALLY focused and Fido needs to keep real still.
br /
br /I rotary file his nails (on low) outdoors when the wind is blowing slightly to reduce our inhaling the shavings, and it's easier to see the vein in the nail outdoors in the sunlight. I lay my pet on his back and trim any long fur between his toes first so it can't get caught. After partially covering his face I hold the unit firmly and grind with light strokes, keeping it moving, and doing a second nail intermittently so nail heat won't build up and he doesn't know what's coming next! Ha-ha!
br /
br /Once you get the hang of it, it's quick and easy to get the job done just be sure to take your time and stay focused! In capable hands, I highly recommend this product! Happy Dremeling!
Poor Battery Attachment
Rating: 1 out of 5
Weight: 3.8 out of 10
Created: Sep 1, 2008
Thanks for your feedback
This item was given to me as Christmas Gift in 2007. The tool works fine but the major complaint I have is that the battery will not stay in the tool! I have been using my corded dremel for the past ten years and finally worn it out. I had expected the same performance with this item but was greatly dissapointed.
br /
br /
br /
br /
A poor long term choice
Rating: 3 out of 5
Weight: 3.8 out of 10
Created: Dec 25, 2008
Thanks for your feedback
While the capabilities of all Dremel products are excellent, this suffers from poor battery life. Mine lasted less than 40 hours of use, and replacements are not available from retailers such as Lowes and Home Depot. With replacements batteries at Amazon for $20 or direct from the manufacturer at $25, unless you really, really need a cordless, spend the extra money up front and go for a 300 series. You will soon recoup the extra cost.
VERY Useful Project and Household Tool
Rating: 4 out of 5
Weight: 3.6 out of 10
Created: Dec 25, 2008
Thanks for your feedback
This item would receive 5 stars, since its usefulness easily merits 5 stars, however there is a problem with the kit I bought. They do not come with the Dremel chuck that makes it convenient to change from one bit to another. The collet-nut system it comes with is time consuming and I don't like it. I had to purchase the chuck separately. The only other negative thing I can think of regarding it is that it should be less expensive to buy an additional rechargeable battery to go with it. Otherwise, this is a great tool and I would recommend it to anyone for crafts or around-the-house projects.
Pet grooming
Rating: 4 out of 5
Weight: 3.6 out of 10
Created: Sep 15, 2008
Thanks for your feedback
I bought this to do our dog's nails. She and I both hate the clipper method. It works well for that and I find that I do it more often since the dog doesn't hate it so much. It took a while for her to establish trust with the machine. I suspect this is a sturdier tool than the petacure advertised on TV and the web and you get added utility. What is missing that petacure has is the clip on guide. That would provide leverage and control that you have to "free hand" with the Dremel. I think I'll get better at it with practice though.
Dremel MultiPro great for pets!!!
Rating: 5 out of 5
Weight: 3.6 out of 10
Created: Sep 17, 2008
Thanks for your feedback
We ordered this tool after reading reviews on the Dremel pet grooming tool. We decided this would be the better option so that we could use it for purposes other than pet nails. It works perfectly! We use the finest sander on our lab and our terrier mix's nails. They both tolerate really well, even though the terrier mix is a spastic dog! My husband has also used the tool to clean his golf clubs. I'm sure after having it for a little longer, we'll be able to take advantage of it's other uses! Great purchase!!
Excellent for trimming pet nails
Rating: 5 out of 5
Weight: 3.6 out of 10
Created: Aug 15, 2008
Thanks for your feedback
I've always been hesitant to trim nails of our 3 pooches using the conventional clippers. The dogs did'nt enjoy it either.
br /
br /I tried the regular dremmel at home and had good success. My confidence was better knowing that I'm more in control and the dogs were so much at ease.
br /
br /I invested in this one for convenience of size and ease of use. For the last few days I've had this, the dogs are getting more and more relaxed. They even fall asleep by the time I'm done with all the nails.
br /
br /Love this tool and would recommend this to any pet owner who may have hurt their pets trimming nails using conventional tools. Just make sure you don't grind a single nail for more than a few seconds.
br /
br /I tried the regular dremmel at home and had good success. My confidence was better knowing that I'm more in control and the dogs were so much at ease.
br /
br /I invested in this one for convenience of size and ease of use. For the last few days I've had this, the dogs are getting more and more relaxed. They even fall asleep by the time I'm done with all the nails.
br /
br /Love this tool and would recommend this to any pet owner who may have hurt their pets trimming nails using conventional tools. Just make sure you don't grind a single nail for more than a few seconds.
Good basic tool, but watch...
Rating: 4 out of 5
Weight: 3.4 out of 10
Created: Dec 25, 2008
Thanks for your feedback
This is a great tool for anyone needing to drill, polish, cut, grind, etch, sand, screw, etc.... but not for big projects. If you have larger projects, consider purchasing a more powerful, corded Dremel. But for crafts and basic home repair, this product works great.
br /The battery pack is easy to get on and off, and holds a charge well. (a back up battery is a good idea with ANY product!)
br /The only thing I can really say I'd improve on, would be the on/off switch. I don't like that it goes High/Off/Low rather than Off/Low/High, for safety reasons. I have, on more than one occassion (while trying to switch tips) switched the unit on. There is no well defined seperation between the Lo/Off/Hi.
br /Otherwise, I am quite happy with it and the accessories it came with.
br /The battery pack is easy to get on and off, and holds a charge well. (a back up battery is a good idea with ANY product!)
br /The only thing I can really say I'd improve on, would be the on/off switch. I don't like that it goes High/Off/Low rather than Off/Low/High, for safety reasons. I have, on more than one occassion (while trying to switch tips) switched the unit on. There is no well defined seperation between the Lo/Off/Hi.
br /Otherwise, I am quite happy with it and the accessories it came with.
Really Nice Set
Rating: 4 out of 5
Weight: 3.4 out of 10
Created: Nov 1, 2008
Thanks for your feedback
This is a really nice set, particularly because it's small enough to fit a woman's hand. Also, because it's battery operated, I can use it anywhere. Furthermore, I use it on the slow speed to file my dog's nails. The slow speed doesn't frighten him.
br /This was a beginning set for me and I would have appreciated a bit more explanation of the various attachments that came with it. Other than that, it's a sweet little deal.
br /This was a beginning set for me and I would have appreciated a bit more explanation of the various attachments that came with it. Other than that, it's a sweet little deal.
Good for dog nails
Rating: 4 out of 5
Weight: 3.4 out of 10
Created: Oct 21, 2008
Thanks for your feedback
I used this on my four Boston Terriers nails. It was better than using the nail clippers. Once I did one or two nails they were used to the noise.
Lightweight and powerful
Rating: 5 out of 5
Weight: 3.4 out of 10
Created: Nov 10, 2008
Thanks for your feedback
At first I wasn't sure about a cordless but figured I'd try it and i'm glad I did. Its lightweight and very easy to use. The battery really lasts a long time. The kit comes with plenty of accessories. My only two complaints is that the accessories aren't really labeled so you have to play match the photo to the accessory. And my other complaint is that when turning on or off, the switch seems to be a little loose and it turns on to super high speed.
br /
br /I used it to sand and buff a few things and it works super. Just make sure you wear goggles and have a good table to work on because the dust flies everywhere.
br /
br /Other than those two things its worth having it.
br /
br /I used it to sand and buff a few things and it works super. Just make sure you wear goggles and have a good table to work on because the dust flies everywhere.
br /
br /Other than those two things its worth having it.
Pleased
Rating: 5 out of 5
Weight: 3.4 out of 10
Created: Sep 27, 2008
Thanks for your feedback
I was looking for something to trim my 100lb dogs nails and this works well. The charge holds up to do all 10 nails at high speed. The housing is sound and strong (unlike the Pedicure for Pets). I can use it to do a number of tasks. The price is fair and it has a nice bag to carry all the items.
short lasting battery and no power at all
Rating: 2 out of 5
Weight: 3.2 out of 10
Created: Dec 25, 2008
Thanks for your feedback
Pros:
br /-small and cheap
br /Cons:
br /-Long charge time required
br /-Ni-Cd batteries inside can't provide enough power to the motor
br /-motor is not nearly powerfull enough for anything harder than plastic or wood
br /-fully charged batteries are running dry in 7-10 min of continuous work
br /-switch design is VERY BAD. it's tended to turn itself ON from slightest touch - very dangerous if you have some cutting head installed at that time.
br /
br /CONCLUSION: don't buy it for your kids, and if you need to work with it for more than just 5 min - then take a corded version and look for more power too, because this obe sucks real bad
br /-small and cheap
br /Cons:
br /-Long charge time required
br /-Ni-Cd batteries inside can't provide enough power to the motor
br /-motor is not nearly powerfull enough for anything harder than plastic or wood
br /-fully charged batteries are running dry in 7-10 min of continuous work
br /-switch design is VERY BAD. it's tended to turn itself ON from slightest touch - very dangerous if you have some cutting head installed at that time.
br /
br /CONCLUSION: don't buy it for your kids, and if you need to work with it for more than just 5 min - then take a corded version and look for more power too, because this obe sucks real bad
Wouldn't recommend it for dog nail trimming.
Rating: 3 out of 5
Weight: 3.2 out of 10
Created: Dec 20, 2008
Thanks for your feedback
I bought this Dremel because it was recommended as a good dog nail trimmer for fearful dogs. My older dog goes spastic at having her nails trimmed and I had hoped she would let me use this to trim her nails. She did not, as hard as I tried. I think it is because it is too loud. I would not recommend this for any dog that has fears of nail trimming. This tool is not the answer.
Received on time.
Rating: 3 out of 5
Weight: 3.2 out of 10
Created: Sep 2, 2008
Thanks for your feedback
The merchant, Target.com, did great. Received new product in a timely fashion. BUT, the battery and charger connection on the Dremel was not good. Had to use a rubber band to tighten the connection in order to charge the battery. Info with the Dremel requested I go to them rather than the merchant with problems. I emailed them. They said to send it back. UPS would have a label to use to pick up the package. It took two weeks for Dremel to send UPS the label and another two weeks to send the replacement. I've had no time to use the Dremel as yet, since it only arrirved today, Sep 2, 2008.
Cordless Freedom - short battery life
Rating: 3 out of 5
Weight: 3.2 out of 10
Created: May 14, 2008
Thanks for your feedback
I purchased this cordless Dremel after some frustration on detailwork while doing some wood carving. The cord always seemed to alter the balance of the tool making it so incredibily difficult to be precise in softwoods - which can mean a pulled cut and a marred piece of wood and a ruined carving.
br /
br /The balance of the tool here is exceptional. Very easy to manipulate with a slow speed that's perfect for my application of soft wood.
br /
br /However... the battery life is horrific. I can work less than 45 minutes before I have to recharge the battery for 2+ hours. I very much wish I could have 3x the life and 1/2 the charging time. I need to (and don't really want to spend the money) get 2 more batteries and another charger.
br /
br /
br /
br /
br /
br /The balance of the tool here is exceptional. Very easy to manipulate with a slow speed that's perfect for my application of soft wood.
br /
br /However... the battery life is horrific. I can work less than 45 minutes before I have to recharge the battery for 2+ hours. I very much wish I could have 3x the life and 1/2 the charging time. I need to (and don't really want to spend the money) get 2 more batteries and another charger.
br /
br /
br /
br /
Very handy
Rating: 4 out of 5
Weight: 3.2 out of 10
Created: Dec 25, 2008
Thanks for your feedback
This unit is very handy for the average homeowner. It comes with a starter supply of cutoff wheels, polishing wheels, sandpaper, etc. The battery is just average. I wish it would last longer before having to be recharged. I also wish this unit had the ability to be plugged in rather than to be solely operated by a battery. The bag gives you the ability to keep your Dremel and all the accessories in one place. I don't see how people get by without owning a Dremel. All in all, a great little tool!
excellent foot smoother
Rating: 5 out of 5
Weight: 3.2 out of 10
Created: Sep 12, 2008
Thanks for your feedback
br /dremel multipro cordless 770
br /
br /just bought it, and i'm not using it for the purpose it was intended. i am sick and tired of buying manicure and pedicure machines that don't have the power to do to job, unless you pay a fortune for them, so i tried the dremel and it kills two birds with one stone. household use and personal. just be careful. it is powerful and will easily sand too much skin away so user beware.
br /
br /peggy slagle
Dremel Tool Review
Rating: 5 out of 5
Weight: 3.2 out of 10
Created: Sep 7, 2008
Thanks for your feedback
I have owned this Dremel tool since August 5, 2008 and have been very pleased with this unit. It is not the strongest and the battery may not last for a long time, but it serves the purpose intended. I am using this Dremel tool for toe nail care. It is perfect for this quality tool.
Great, when it works
Rating: 3 out of 5
Weight: 3.0 out of 10
Created: Oct 13, 2008
Thanks for your feedback
I bought this Dremel to trim my two Bulldogs nails and it's great when it works. However, I've had it just over a month and am sending it back to Dremel for the second time. The battery pack just won't stay in place and I need two hands to operate the thing; very hard to do when one hand needs to hold a dog paw steady. Dremel customer service has been great, very friendly and going the extra mile to fix it, but I wish I would have returned it to Amazon within the 30 day window so I could buy a corded option or at least get a different model. If you're looking at this for my same purpose, it works great, 3-4 seconds to trim each nail, but be prepared to duck tape the battery pack in place.
Good but
Rating: 3 out of 5
Weight: 3.0 out of 10
Created: Oct 12, 2008
Thanks for your feedback
Good tool just for small jobs. 30 minutes or less
br /
br /Dremel should make the cordless just an option.
br /I think corded is so much better.
br /
br /
br /
br /
br /Dremel should make the cordless just an option.
br /I think corded is so much better.
br /
br /
br /
Good idea to buy a second battery
Rating: 3 out of 5
Weight: 3.0 out of 10
Created: Sep 22, 2008
Thanks for your feedback
I bought this tool specifically to do my dogs' nails. It does a great job. The only two draw backs: #1 - the battery doesn't always last for all 4 feet, especially if they have gotten a little overgrown. And since we have 3 large dogs, I can't get more than one dog done at one sitting. I have ordered a second battery so I will always have a backup ready to go. #2 - the battery sometimes won't stay attached properly unless I fiddle with it. I'm not sure if it's the battery, or the unit. Overall though, for what I'm using it for it does what I want.
NOISY!!
Rating: 3 out of 5
Weight: 3.0 out of 10
Created: Sep 6, 2008
Thanks for your feedback
My gosh, I thought this would be perfect for the dogs nails. Especially based on the reviews. This thing is so loud on full speed even I flinch. On low speed it is tolerable but still freaks the dogs out with the sound. I didn't expect a battery operated device to be so LOUD!
Good tool for hobbiest
Rating: 4 out of 5
Weight: 3.0 out of 10
Created: Dec 25, 2008
Thanks for your feedback
This is a good purchase and a great tool to work on my model train hobby.
A nice package...
Rating: 4 out of 5
Weight: 3.0 out of 10
Created: Dec 12, 2008
Thanks for your feedback
Have enjoyed this product so far. Have only used it for a small number of jobs at this point, but it seems to be well made and came with lots of attachments to choose from.
br /
br /Have used it to trim dog's nails as well. It takes a little getting used to (for the dog) but give the dogs some treats and take your time and they will get used to it after a few tries..
br /
br /Have used it to trim dog's nails as well. It takes a little getting used to (for the dog) but give the dogs some treats and take your time and they will get used to it after a few tries..
drummel
Rating: 4 out of 5
Weight: 3.0 out of 10
Created: Sep 22, 2008
Thanks for your feedback
Seems to be a very good item. I am using it to trim my dogs toenails.
br /
br /But some of the discs arrived broken, I didn't call it in, just figured it was only 4 of the little flat disc things wouldn't be worth it to you to send to me. But the item seems to be good for what I intended it to be for. thanks. Brenda
br /
br /But some of the discs arrived broken, I didn't call it in, just figured it was only 4 of the little flat disc things wouldn't be worth it to you to send to me. But the item seems to be good for what I intended it to be for. thanks. Brenda
An incredibly useful tool that even I can use without mishap
Rating: 5 out of 5
Weight: 3.0 out of 10
Created: Dec 25, 2008
Thanks for your feedback
I'm not what you would call a handy sort of fellow; a few years ago, my greatest handyman-type success was the successful changing of a light bulb. Five years ago, I had never even heard of Dremel; now, I wonder how and why anyone goes through life without a handy-dandy Dremel tool. A few years ago, I got it in my head that I wanted to build my own working versions of Tom Servo, Crow T. Robot, and Gypsy of Mystery Science Theater 3000 fame. Such a project involves some tool-oriented activity, so for the first time in my life I found myself looking at tools. Since I know nothing about tools, I went about my business trying to look like I knew what I was looking for. I think every man responds to the siren call of the hardware department at some point in his life, but not until I found myself looking at a selection of Dremel products did I feel a strange lump of excitement in the pit of my stomach; tool anxiety had suddenly turned into tool excitement, and I gleefully returned home with this Dremel Multipro Cordless kit - feeling quite manly, I might add.pExactly what does this thing do, you ask? Dude, what doesn't it do? It slices, it dices - no, wait, that's not right. This Dremel tool carves, it grinds, it polishes, it sands, it cuts, it brushes, it drills, it does darn near everything. It comes with 50 accessories in the form of abrasive wheels, drill bits, wire brushes, polishers, engraving cutters, router bits, and cutting wheels. I, being born with a passive tool-user gene, can't really tell what each accessory piece does just by looking at it, but I'm sure most halfway intelligent people can. I have fun just trying to figure it all out. What I needed at the time I bought my Dremel kit was a little sander tool, and even I could recognize the accessories made for that purpose. I soon had my proto-Tom Servo head free of jagged edges and was ready to delve further into my little project; this was just the first of many little Dremel success stories in my suddenly tool-enabled household.pThe tool itself is a portable two-speed unit that comes with its own battery and charger. Whenever you get through using it, just plug it back up to let it recharge, and it's ready to go the next time you need it. It is light-weight and allows for different grips, helping to ensure you can pretty much reach whatever little space you need to get to with it. This model has two speeds - 7500 and 15000 rpm. That's pretty darn fast, and that high speed combined with the unit's low torque makes life pretty simple for you - the tool does all the work for you, making this the perfect tool for weaklings such as myself. Now, if you're into some heavy-duty work, the Dremel tool may not meet all of your needs, but for many odd jobs around the house and all manner of hobby activities, a portable Dremel tool is the way to go.pI must say that the documentation that comes with the kit is quite impressive and does actually describe each accessory and its proper uses. Of course, my being a man, I don't think it's legal for me to read a manual, so I just get by on instinct and luck. The kit also comes with a colorful little book telling you all sorts of jobs you can do with your new Dremel tool - if you have a significant other, you might want to keep this kind of information away from her/him. Even if you do get stuck doing odd jobs your better half would never have conceived of without the insight of the Dremel documentation, at least you can be comforted by the fact that you will have a lot of fun playing with your new essential Dremel tool.
Dremel Review
Rating: 5 out of 5
Weight: 3.0 out of 10
Created: Dec 25, 2008
Thanks for your feedback
Very easy to handle and you have the control to manuever the machine around tight places.
Dremel 7700-02 MultiPro
Rating: 5 out of 5
Weight: 3.0 out of 10
Created: Dec 15, 2008
Thanks for your feedback
I love the fact that this product has a recharger, instead of batteries. Product came quick and professionally. Thank you!
Good product, perfect for what we needed.
Rating: 5 out of 5
Weight: 3.0 out of 10
Created: Nov 25, 2008
Thanks for your feedback
We wanted something that can be used to file the dog's nails and to use for other small projects around the house. This dremel tool is good for what we need. Only problem- it gets a bit hot when left to file for more than a second or two, so we need to be careful on the dog's feet.
Great little tool
Rating: 5 out of 5
Weight: 3.0 out of 10
Created: Oct 6, 2008
Thanks for your feedback
I've put it through a rugged test for over a month. Can't find anything at all wrong with it.
br /Just bought another one for my son's birthday. Hope it's just as good.
br /Just bought another one for my son's birthday. Hope it's just as good.
Surprisingly a good deal for the money!
Rating: 5 out of 5
Weight: 3.0 out of 10
Created: Sep 30, 2008
Thanks for your feedback
When I recieved my Dremmel it came with a carrying case and plenty of attachements for broader variety of uses. I was please to get all of this for a low price. Dremel MultiPro Cordless 7700-02 20,000 RPM Two-Speed 7.2V Rotary Tool System w/50 Accessories
Awesome!
Rating: 5 out of 5
Weight: 3.0 out of 10
Created: Sep 30, 2008
Thanks for your feedback
This product is great. I use it for a bunch of projects around the house, especially filing my dogs toenails, so they don't scratch up the furniture or flooring!
Dremel great for dog nails
Rating: 5 out of 5
Weight: 3.0 out of 10
Created: Aug 16, 2008
Thanks for your feedback
My dog's nails have always been long - allowing for a long quick to grow. One day she completely ripped off a nail while chasing a rabbit. Very costly at the vet and very painful for the both of us. Dremel is a great way to get those nails down. She tolerates it well even though one vet said he'd have to knock her out just to clip her nails. Just keep the foot to the back so she can't see and all is good. Works great.
Great, versatile tool!
Rating: 5 out of 5
Weight: 3.0 out of 10
Created: Jul 18, 2008
Thanks for your feedback
This tool is a powerful unit, that does exactly what I wanted it to, and more. The price was fantastic, and it arrived very quickly.
It depends on what you want to do with it.
Rating: 2 out of 5
Weight: 2.8 out of 10
Created: Jul 25, 2008
Thanks for your feedback
I bought this recently and figured 20,000 rpms would be more than enough for what I would do around my apartment. Well I guess not? Anything I attempt to cut stops the tool from cutting completely. The battery dies in about an 30 minuts of heavy use.
br /
br /I would suggest going with something corded, or a 10.8v battery.
br /
br /I would suggest going with something corded, or a 10.8v battery.
Great deal for the price
Rating: 4 out of 5
Weight: 2.8 out of 10
Created: Aug 17, 2008
Thanks for your feedback
I love the dremel. You can't beat the price. My only difficulty was with the instructions. It didn't tell how to change the emery wheels. After taking it to my husband, he figured it out, you have to loosen the screw on the end and slide off the band.
br /Otherwise, GREAT product. I use it to file my dogs nails.
br /Otherwise, GREAT product. I use it to file my dogs nails.
The one I got was pretty much worthless
Rating: 2 out of 5
Weight: 2.4 out of 10
Created: Aug 24, 2008
Thanks for your feedback
It all comes down to battery life, power delivered, and ergonomics. The batter when fully charged lasts about five minutes. The power delivered is no where near what I get with my BD Versapak rotary tool. I was looking for this to be a step up and instead found it to be a total waste of money. As for ergonomics, the thing is heavy, cumbersome, and the battery has a way of coming disconnected during the few minutes it is able to deliver a barely acceptable charge.
not what I expected
Rating: 3 out of 5
Weight: 2.4 out of 10
Created: Oct 16, 2008
Thanks for your feedback
I purchased this dremel primarily for trimming my dogs nails. It is noisier than expected. It does not have a nail guard like the peticare.
br /I read reviews before purchasing this. I am still learning to use this tool; the owners manual is good ;the cutting tools do not do the things I wanted it to do. I am a chainsaw carver and I was hoping to use the dremel for detail work. I don't beleive I have the attachments capable of those procedures.
br /I read reviews before purchasing this. I am still learning to use this tool; the owners manual is good ;the cutting tools do not do the things I wanted it to do. I am a chainsaw carver and I was hoping to use the dremel for detail work. I don't beleive I have the attachments capable of those procedures.
Nice set, wrong tool shape
Rating: 2 out of 5
Weight: 0.4 out of 10
Created: Dec 25, 2008
Thanks for your feedback
The form, fit and function of the hand-held tool is poor, but the tool set attachments are great. Even the little bag is a nice touch.
br /
br /After many decades, I bought my first Dremel hand-held tool. However, if the battery was turned 180 degrees and the French curves on shallower side were made into a flat surface, parallel to the rotating axis, then it would be extremely useful for cutting balsa wood to make models. It would also be able to sand all surfaces with precision. I don't believe there is one Dremel table that would have this stand-alone-flat-surface capability to handle any work size.
br /
br /I would guess that Dremel Marketing dictates to Dremel Engineering, just like marketing at Microsoft must dictate tons of application bells and whistles, whose bugs are rarely fixed (even after 17 years of re-packaging MS Office applications)...marketing seems to drive almost all companies.
br /
br /I registered my Dremel product and signed up for the forum. But I don't think Dremel wants to hear from folks with any suggestions. Of the 30-40 permissions, I only had the right to read, not to make replies. I guess the Dremel legal department reins in users with muzzles...no wonder there are very few postings.
br /
br /If you do register with Dremel, DO NOT check any boxes pertaining to your interests. If you do, you can count on a deludge of third-party emails, selling everything from travel deals to fake online degrees. It appears that Dremel sells your name to profit from you, while you are not permitted into the domain of a one-sided forum. I've spent way too much of my time unsubscribing and adding to this review (which you will not see as the most current review on Amazon).
br /
br /If "money is no object," then buy all the Dremel tools (shaper/router table, scroll saw, drilling station, etc.) that you need to do the job right (hand-held tools with French curves are how Marketing promotes sales of all other Dremel tools). Just don't expect the tool to be innovative in form or fit (I am impressed with 20k rpm, but speed falls off quickly as battery drains), and don't expect the battery to last more than 0.5 hours cutting very soft Balsa wood.
br /
br /Technical functionality is the very best of form, fit, and function. Aesthetic functionality is usually the application of misguided technical functionality dollars. We consumers will always buy what we need, regardless of bad press, but more product support, allowing us to provide critical feedback, would be a good thing for everyone...not using "buy what we need" as a marketing lever to sell us inferior products.
br /
br /According to the U.S. Department of Labor Health Hazards (OSHA)abrasive saw blades and disks:
br /
br /(Author, not OSHA, note: You should wear a protective mask when using Dremel abrasive disks or any abrasive saw blade. This may not mean that all abrasive disks are coated with Cobalt, but I don't know what substance, other than carborundum, could be coated on such blades. Even though you should wear a filter mask, it may not absorb Cobalt fumes).
br /
br /OSHA: "Health Hazards. Cobalt Dust Stellite tipped saw blades generate a fine dust containing cobalt when sharpened. Cobalt is a silvery, bluish-white, odorless, and magnetic metal (author, not OSHA, note: test yours abrasive disk...magnetic steel disks will be misleading...with a strong magnet). The fume and dust of cobalt metal is odorless and black. Without proper ventilation, cobalt overexposures are possible. Cobalt also is combustible and burns brilliantly (Author, not OSHA, note: Dremel disks do not burn when exposed to flame)in air at room temperature. Dusts of cobalt metal or cobalt compounds may form explosive mixtures in air.
br /
br /Inhalation of cobalt metal fume and dust may cause interstitial fibrosis, interstitial pneumonitis, myocardial and thyroid disorders, and sensitization of the respiratory tract and skin. Chronic cobalt poisoning may also produce polycythemia and hyperplasia of the bone marrow. Among 12 workers engaged in the manufacture or grinding of tungsten carbide tools (cobalt is used as a binder for tungsten carbide crystals), who developed interstitial lung disease, there were eight fatalities.
br /
br /The current Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) for cobalt metal, dust, and fume (as Co) is 0.1 milligram per cubic meter (mg/m(3)) of air as an 8-hour time-weighted average (TWA) concentration [29 CFR 1910.1000, Table Z-1].
br /
br /Signs and symptoms of exposure:
br /
br / Acute exposure: Acute exposure to cobalt metal, dust, and fume is characterized by irritation of the eyes and, to a lesser extent, irritation of the skin. In sensitized individuals, exposure causes an asthma-like attack, with wheezing, bronchospasm, and dyspnea Ingestion of cobalt may cause nausea, vomiting, diarrhea, and a sensation of hotness.
br /
br / Chronic exposure: Chronic exposure to cobalt metal, dust, or fume may cause respiratory or dermatologic signs and symptoms. Following skin sensitization, contact with cobalt causes eruptions of dermatitis in creases and on frictional surfaces of the arms, legs, and neck. Following sensitization of the respiratory system, cobalt exposure causes an obstructive lung disease with wheezing, cough, and shortness of breath. Chronic respiratory exposure results in reduced lung function, increased fibrotic changes on chest X-ray, production of scanty mucoid sputum, and shortness of breath. Chronic cobalt poisoning may cause polycythemia, hyperplasia of the bone marrow and thyroid gland, pericardial effusion, and damage to the alpha cells of the pancreas.
br /
br /Methods that are effective in controlling worker exposures to cobalt metal, dust, and fume, depending on the feasibility of implementation, are as follows:
br /* Process enclosure,
br /* Local exhaust ventilation,
br /* General dilution ventilation, and
br /* Personal protective equipment."
br /
br /Author, not OSHA, note: In terms of other brands of saw blades, you should not use abrasive blades...use something else (An Evolution Rage 2 Chop Saw is fantastic and patented technology...this is where I found out about the dangers of abrasive disks) . Abrasive blades can also explode in your face when over-heated.
br /
br /After many decades, I bought my first Dremel hand-held tool. However, if the battery was turned 180 degrees and the French curves on shallower side were made into a flat surface, parallel to the rotating axis, then it would be extremely useful for cutting balsa wood to make models. It would also be able to sand all surfaces with precision. I don't believe there is one Dremel table that would have this stand-alone-flat-surface capability to handle any work size.
br /
br /I would guess that Dremel Marketing dictates to Dremel Engineering, just like marketing at Microsoft must dictate tons of application bells and whistles, whose bugs are rarely fixed (even after 17 years of re-packaging MS Office applications)...marketing seems to drive almost all companies.
br /
br /I registered my Dremel product and signed up for the forum. But I don't think Dremel wants to hear from folks with any suggestions. Of the 30-40 permissions, I only had the right to read, not to make replies. I guess the Dremel legal department reins in users with muzzles...no wonder there are very few postings.
br /
br /If you do register with Dremel, DO NOT check any boxes pertaining to your interests. If you do, you can count on a deludge of third-party emails, selling everything from travel deals to fake online degrees. It appears that Dremel sells your name to profit from you, while you are not permitted into the domain of a one-sided forum. I've spent way too much of my time unsubscribing and adding to this review (which you will not see as the most current review on Amazon).
br /
br /If "money is no object," then buy all the Dremel tools (shaper/router table, scroll saw, drilling station, etc.) that you need to do the job right (hand-held tools with French curves are how Marketing promotes sales of all other Dremel tools). Just don't expect the tool to be innovative in form or fit (I am impressed with 20k rpm, but speed falls off quickly as battery drains), and don't expect the battery to last more than 0.5 hours cutting very soft Balsa wood.
br /
br /Technical functionality is the very best of form, fit, and function. Aesthetic functionality is usually the application of misguided technical functionality dollars. We consumers will always buy what we need, regardless of bad press, but more product support, allowing us to provide critical feedback, would be a good thing for everyone...not using "buy what we need" as a marketing lever to sell us inferior products.
br /
br /According to the U.S. Department of Labor Health Hazards (OSHA)abrasive saw blades and disks:
br /
br /(Author, not OSHA, note: You should wear a protective mask when using Dremel abrasive disks or any abrasive saw blade. This may not mean that all abrasive disks are coated with Cobalt, but I don't know what substance, other than carborundum, could be coated on such blades. Even though you should wear a filter mask, it may not absorb Cobalt fumes).
br /
br /OSHA: "Health Hazards. Cobalt Dust Stellite tipped saw blades generate a fine dust containing cobalt when sharpened. Cobalt is a silvery, bluish-white, odorless, and magnetic metal (author, not OSHA, note: test yours abrasive disk...magnetic steel disks will be misleading...with a strong magnet). The fume and dust of cobalt metal is odorless and black. Without proper ventilation, cobalt overexposures are possible. Cobalt also is combustible and burns brilliantly (Author, not OSHA, note: Dremel disks do not burn when exposed to flame)in air at room temperature. Dusts of cobalt metal or cobalt compounds may form explosive mixtures in air.
br /
br /Inhalation of cobalt metal fume and dust may cause interstitial fibrosis, interstitial pneumonitis, myocardial and thyroid disorders, and sensitization of the respiratory tract and skin. Chronic cobalt poisoning may also produce polycythemia and hyperplasia of the bone marrow. Among 12 workers engaged in the manufacture or grinding of tungsten carbide tools (cobalt is used as a binder for tungsten carbide crystals), who developed interstitial lung disease, there were eight fatalities.
br /
br /The current Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) for cobalt metal, dust, and fume (as Co) is 0.1 milligram per cubic meter (mg/m(3)) of air as an 8-hour time-weighted average (TWA) concentration [29 CFR 1910.1000, Table Z-1].
br /
br /Signs and symptoms of exposure:
br /
br / Acute exposure: Acute exposure to cobalt metal, dust, and fume is characterized by irritation of the eyes and, to a lesser extent, irritation of the skin. In sensitized individuals, exposure causes an asthma-like attack, with wheezing, bronchospasm, and dyspnea Ingestion of cobalt may cause nausea, vomiting, diarrhea, and a sensation of hotness.
br /
br / Chronic exposure: Chronic exposure to cobalt metal, dust, or fume may cause respiratory or dermatologic signs and symptoms. Following skin sensitization, contact with cobalt causes eruptions of dermatitis in creases and on frictional surfaces of the arms, legs, and neck. Following sensitization of the respiratory system, cobalt exposure causes an obstructive lung disease with wheezing, cough, and shortness of breath. Chronic respiratory exposure results in reduced lung function, increased fibrotic changes on chest X-ray, production of scanty mucoid sputum, and shortness of breath. Chronic cobalt poisoning may cause polycythemia, hyperplasia of the bone marrow and thyroid gland, pericardial effusion, and damage to the alpha cells of the pancreas.
br /
br /Methods that are effective in controlling worker exposures to cobalt metal, dust, and fume, depending on the feasibility of implementation, are as follows:
br /* Process enclosure,
br /* Local exhaust ventilation,
br /* General dilution ventilation, and
br /* Personal protective equipment."
br /
br /Author, not OSHA, note: In terms of other brands of saw blades, you should not use abrasive blades...use something else (An Evolution Rage 2 Chop Saw is fantastic and patented technology...this is where I found out about the dangers of abrasive disks) . Abrasive blades can also explode in your face when over-heated.
Wimpy, Wimpy Wimpy!
Rating: 1 out of 5
Weight: 0.0 out of 10
Created: Apr 4, 2008
Thanks for your feedback
I got this thinking it would help out in basic home repair. I think it is more for the hobbiest. It wouldn't do even simple home repair work. Ended up returning it!
